This module is ideal for tarp or lift applications. It can also be used on hoist, hatches, winches, snowplows, intake/exhaust fans, vehicle outriggers and other reversing applications. When the appropriate control circuit is energized with a pulse it will reverse the direction of the motor.
Unit of Measure


Minimum Order

N/A 1

Package Type

N/A Each

Units Per Package

N/A 1

UPS package type

N/A Customer Supplied Package

Shipping Weight

N/A 0.5 Pound

Include shipping calculator

N/A 1

Direct Current (DC) Voltage

N/A 12 V

Continuous Current

N/A 50 A
Intermittent Current1 N/A 70 A

Housing Materials

N/A Plastic

Contact Materials

N/A Silver

Special Applications

N/A Reversing

Contact Threads

N/A 5/16"-24 Threads hex nuts and lock washers included

Terminal Material

N/A Tin-plated brass

International Protection (IP) Rating

N/A IP-67

Additional Information

Additional Information

N/A High performance silver tin oxide contacts assure long cycle life.
  • 70 A at 12 V DC intermittent, max On time 5 mins; Off time 3 mins; 50 A at 12 V DC continuous.
  • Load current inrush: 150 A. Pull-in voltage 7.8 V max.
  • Low coil current draw. Coil resistance 82 Ω ±10%.
  • Vibration resistance: 10-55 Hz. Double amplitude 1.5 mm.
  • Environmental: -40 ºC to 85 ºC. Rust and moisture-resistant plastic housing.
  • Fully sealed to IP-67 with high strength epoxy for total moisture protection.
  • Ignition protected.
  • Tin-plated brass studs and hardware for corrosion resistance.
  • Dielectric strength: 500 V RMS between coil and contact.
  • For intermittent operation, control switch should be Mom On-Off-Mom On; for continuous operation On-Off-On.
  • 1 5 mins max on time; 3 mins off time