"Selling Quality Merchandise Since 1933"
Bailey Motor Equipment Co.
Contact Us:
800.394.8134Call - Bailey Motor Equipment Co.
mitch@baileymotorequip.comEmail - Bailey Motor Equipment Co.
Request for Info / Quote
  • Analog Pane Meters - ST70 & ST90 Series

    Size ST70 - 2.5" Square
    Accuracy:

  • All AC & DC Iron Vane +/- 2% of Full Scale
  • All AC Rectifier Type +/-3% of Full Scale
  • All Frequency Type +/-0.3HZ

  • Overload:
  • All AC & DC Voltmeters - 50% Momentary / 20% Prolonged
  • All AC & DC Ammeters - 50% Momentary / 20% Prolonged
  • All Frequency Type - 20% Maximum

  • Burden: AC Ammeters - 0.5VA Maximum
    Standards: ANSI C39.1
    Approvals: UL, CE

  • Analog Pane Meters - ST70 & ST90 Series

    Size ST70 - 2.5" Square
    Accuracy:

  • All AC & DC Iron Vane +/- 2% of Full Scale
  • All AC Rectifier Type +/-3% of Full Scale
  • All Frequency Type +/-0.3HZ

  • Overload:
  • All AC & DC Voltmeters - 50% Momentary / 20% Prolonged
  • All AC & DC Ammeters - 50% Momentary / 20% Prolonged
  • All Frequency Type - 20% Maximum

  • Burden: AC Ammeters - 0.5VA Maximum
    Standards: ANSI C39.1
    Approvals: UL, CE

  • Analog Pane Meters - ST70 & ST90 Series

    Size ST70 - 2.5" Square
    Accuracy:

  • All AC & DC Iron Vane +/- 2% of Full Scale
  • All AC Rectifier Type +/-3% of Full Scale
  • All Frequency Type +/-0.3HZ

  • Overload:
  • All AC & DC Voltmeters - 50% Momentary / 20% Prolonged
  • All AC & DC Ammeters - 50% Momentary / 20% Prolonged
  • All Frequency Type - 20% Maximum

  • Burden: AC Ammeters - 0.5VA Maximum
    Standards: ANSI C39.1
    Approvals: UL, CE

  • Analog Pane Meters - ST70 & ST90 Series

    Size ST90 - 3.5" Square
    Accuracy:

  • All AC & DC Iron Vane +/- 2% of Full Scale
  • All AC Rectifier Type +/-3% of Full Scale
  • All Frequency Type +/-0.3HZ

  • Overload:
  • All AC & DC Voltmeters - 50% Momentary / 20% Prolonged
  • All AC & DC Ammeters - 50% Momentary / 20% Prolonged
  • All Frequency Type - 20% Maximum

  • Burden: AC Ammeters - 0.5VA Maximum
    Standards: ANSI C39.1
    Approvals: UL, CE

  • Analog Pane Meters - ST70 & ST90 Series

    Size ST90 - 3.5" Square
    Accuracy:

  • All AC & DC Iron Vane +/- 2% of Full Scale
  • All AC Rectifier Type +/-3% of Full Scale
  • All Frequency Type +/-0.3HZ

  • Overload:
  • All AC & DC Voltmeters - 50% Momentary / 20% Prolonged
  • All AC & DC Ammeters - 50% Momentary / 20% Prolonged
  • All Frequency Type - 20% Maximum

  • Burden: AC Ammeters - 0.5VA Maximum
    Standards: ANSI C39.1
    Approvals: UL, CE

  • Analog Pane Meters - ST70 & ST90 Series

    Size ST90 - 3.5" Square
    Accuracy:

  • All AC & DC Iron Vane +/- 2% of Full Scale
  • All AC Rectifier Type +/-3% of Full Scale
  • All Frequency Type +/-0.3HZ

  • Overload:
  • All AC & DC Voltmeters - 50% Momentary / 20% Prolonged
  • All AC & DC Ammeters - 50% Momentary / 20% Prolonged
  • All Frequency Type - 20% Maximum

  • Burden: AC Ammeters - 0.5VA Maximum
    Standards: ANSI C39.1
    Approvals: UL, CE

  • Sentry Battery Charges

    The Sentry UL range provides automatic, current limited and thyristor controlled charging of vented lead acid or NiCd batteries. The units may be used in a wide range of industrial charging applications, including standby engines, pumps and generators.

    The charger uses an open frame construction, designed for surface mounting in an enclosed panel. Each unit consists of a transformer, rectifier and control circuit. The control circuit ensures that the charger maintains a battery voltage at the pre-calibrated float level, while supplying any additional load current up to the specified maximum.

    When used as a float charger, the unit is designed to give a constant current output while battery voltage is below a ‘knee point’ (approx. 13V on a 12V LA). Above the knee-point, as the battery approaches its float voltage, the Sentry output current ramps down. This multi-stage charge regime gives an optimum combination of fast charge rate, followed by float charge without overcharging.

  • SMPS Battery Chargers

    The SMPS is a constant output voltage, current limited, battery charger specially designed for permanent connection to genset starter batteries.

    Open chassis, metal cased design is suitable for bolt and stud mounting in an enclosed panel.

    • 100 KHz switchmode architecture
    • Lead acid or NiCd battery compatible
    • Constant voltage output
    • Current limited
    • Rugged design for industrial environments
    • Wide operating voltage range
    • Float charging system
    • Rectifier fail output
    • Charger fail
    • Boost charge
    • Short circuit protection
    • Overload protection
    • High temperature protection
    • Plug-in connection system

  • 2.25 ID Current Transformers

    • Used for Ammeter, Wattmeter, Relaying, and Energy Management Applications
    • Frequency 50 - 400 Hz. Insulation Class 0.6 KV BIL 10 KV
    • Molded thermoplastic housing. Optional Mounting Brackets available.
    • Conforms to ANSI C57.13 and applicable IEC standards.
    • Secondary is available with 5A, 1A, 0.1A, 10VAC and 5VAC rating.
    • Choice of either 8-32 Screw Terminals or 16 AWG Lead Wires.
    • Available as U.L. Recognized Component File E100575, contact factory for information.
    • Other primary current ratings, up to 1500A are available upon request.
    • Available with Intermediate ratio and Center Taps.

  • MultiPower AC Metering

    The M850 MultiPower is a UL recognized, complete 3 phase digital universal metering system in a standard 96 x 96 mm DIN case. It is a cost-effective replacement for traditional panel meters. This multifunction power meter is suitable for low, medium and high voltage control panels, gensets, building management systems, and power management systems.

  • MultiPower DC Metering

    The M850-MPD is a complete DC measuring, digital universal metering system in a standard 96 x 96mm DIN case. This multifunction power meter is suitable for DC applications ranging from 0-800V,DC (0-10A or 0-50mV shunt operated DC amps). This easy-to-read meter measures, calculates and displays main electrical parameters on your DC system quickly and easily.

  • Bailey Motor Equipment Co.